Because our printers are designed to grow with the user and their budget, it can be expaned to print larger, smaller or more efficient by installing the following accessories:stalling the following accessories:

  Ring Vat +
Build Plate

The ring vat needs less than 1L of resin to fill. This is great to test out new resins or print small jewellery. The build plate will allow a maximum projection area of 80mm x 45mm. The vat
is 50mm deep. Delivery with printer only.

US $220

 Micro Build Plate

The 316 stainless steel build plate 146mm x 140mm (5.74in x 5.51in), build area 146mm x 82mm (5.74in x 3.22in).

 Tiny Build Plate

The 316 stainless steel build plate 200mm x 140mm (7.87in x 5.51in), build area 200mm x 113mm (7.87in x 4.44in).

US $95

US $105

Big Vat

Wide Build Plate

Tripple Build Plate

(Coming soon)

316 stainless steel build plate 405mm x 262mm (15.9in x 10.31in), build area 405mm x 250mm (15.94in x 9.8in).

US $180

316 The big vat will allow the user to print at 400mm x 250mm x 20mm (15.74in x 9.84in x 0.78in).

US $140 (TBC)

316 stainless steel x 3 build plates, build area 130mm x 250mm (5.11in x 9.84in).

US $185 

(Coming soon)

Tripple Vat

(Coming soon)

        Auto Levelling Feet

Projector Movement

(Coming soon)

Used to make printing of big flat surfaces easier by cutting the bulge that forms after dipping the part to coat it with resin. The wiper is also used to get the perfect layer height.

Will keep your printer perfectly leveled all the time. Great if the printer lives on a wooden floor with people walking past it.

Move the projector assembly automaticlally in Gizmetor by just changing the projection area. No need to manually move the projector assembly anymore to increase or decrease the projection area. Now only focus the lens and print.

US $140 (TBC)

US $1400

US $475

(Coming soon)

        Auto Mixer

Auto Calibrating
Wiper                     

(Coming soon)

Get one of these to mix the resin for you - until then, use a spoon to mix the resin by hand or a drill with a whisk on :)

Used to make printing of big flat surfaces easier by cutting the bulge that forms after dipping the part to coat it with resin. The wiper is also used to get the perfect layer height.

US $475

US $200

Get our world famous optional super-speed add-on to alternate between speeds to suit your high resolution
or super fast output needs.


only 
US $2600

 

                                                                              
                                              This add-on is extra hardware that can be added to any of the machines.
             It includes brackets, bearing blocks, rails and other electronics. It will allow the user to print objects 135mm x
                                                        76mm x 10mm (5.31in x 2.99in x 0.39in) in just 2 minutes


                                                                            It has it’s limitations though:
                                                                         - Expect slightly lower resolutions
                                                                         - The object needs to have a certain wall thickness for it to work

 




 

 

 Form 1 Vat

Form 1 compatible vat with lid

US $70

 Form 1 Vat